Featured
-
Online Exporter Low Pass Passive Filter - RF Notch Filter & Band-stop Filter — Concept Microwave
Description Notch filter known also as a band stop filter or band stop filter, blocks and rejects frequencies that lie between its two cut-off frequency points passes all those frequencies either side of this range. It is another type of frequency selective circuit that functions in exactly the opposite way to the Band Pass Filter we looked at before. Band-stop filter can be represented as a combination of low-pass and high-pass filters if the bandwidth is wide enough that the two filters do ... -
Professional China Duplexer Uhf Repeater - Duplexer/Multiplexer/Combiner — Concept Microwave
Description Cavity duplexers are three port devices used in Tranceivers (transmitter and receiver) to separate the Transmitter frequency band from the receiver frequency band. They share a common antenna while working simultaneously at different frequencies. A duplexer is basically a high and a low pass filter connected to an antenna. Applications 1. TRS, GSM, Cellular, DCS, PCS, UMTS 2. WiMAX, LTE System, 5G Wireless Communications 3. Broadcasting, Satellite System 4. Point to Point & Mu... -
Hot New Products 3db Directional Coupler - RF Passive Wideband Coaxial 10dB Directional Coupler — Concept Microwave
Description Concept’s directional couplers can be used in applications for power monitoring and leveling, sampling of microwave signals, reflection measurements and for laboratory test and measurement, defense / military, antenna and other signal related uses. 10 dB directional coupler will provide an output of 10 dB below the input signal level, and a “Main Line” signal level which has very little loss (0.46 dB theoretically). Availability: IN STOCK, NO MOQ and free for testing ... -
Leading Manufacturer for Wave Guide Filter - RF and Passive Microwave Bandpass Filter — Concept Microwave
Description RF Bandpass filter is passive RF components used to pass signals within a specific frequency band and reject unwanted out-of-band signals, which are widely used in wireless transmitters and receivers for removing unwanted/noise signals . Important specifications include the center frequency, passband (expressed either as start and stop frequencies or as a percentage of the center frequency), rejection and steepness of rejection, and width of the rejection bands Availability: NO M... -
Hot sale 3 Way Power Splitter - RF Fixed Attenuator & Load — Concept Microwave
Description Fixed Attenuators are electronic devices used to reduce the power level of a signal by a fixed amount with minimal distortion. They are designed to have a fixed and unchangeable attenuation. Fixed attenuators assist in preventing excess signals in devices or in reducing the effects of improper input/output terminations of oscillators, amplifiers etc., by controlling the power levels of the devices to a given value or range. Applications 1. Attenuators are used as volume control eq... -
Manufacturer for Hybrid Coupler 180 Degree - RF Passive 90 Degree 3dB Hybird Coupler — Concept Microwave
Description Concept’s 90 degree 3dB hybrid coupler is a four-port device that is used either to equally split an input signal into two paths with a 90 degree phase shift between them with an attenuation of 3 dB or to combine two signals while maintaining high isolation between them , which is widely used in amplifiers, mixers, power combiners / dividers, antenna feeds, attenuators, switches, and phase shifters,where unwanted reflections can damage the circuit. This type of coupler is also kno... -
Wholesale Combiner Divider - SMA DC-18000MHz 2 Way Resistive Power Divider — Concept Microwave
Features 1. Functions as a RF hub with equal loss for all paths 2. Available in wideband frequency bandwidths covering the range of DC – 8GHz and DC – 18.0 GHz 3. Can be used to connect multiple radios for testing in closed network Availability: IN STOCK, NO MOQ and free for testing Min. Frequency DC Max. Frequency 18000MHz Number of the outputs 2 Ports Insertion loss ≤6±1.5dB VSWR ≤1.60 (Input) ≤1.60 (Output) Amplitude Balance ≤±0.8dB Phase B... -
Factory Cheap Hot 6db Directional Coupler - RF Passive Wideband Coaxial 10dB Directional Coupler — Concept Microwave
Description Concept’s directional couplers can be used in applications for power monitoring and leveling, sampling of microwave signals, reflection measurements and for laboratory test and measurement, defense / military, antenna and other signal related uses. 10 dB directional coupler will provide an output of 10 dB below the input signal level, and a “Main Line” signal level which has very little loss (0.46 dB theoretically). Availability: IN STOCK, NO MOQ and free for testing ... -
Hot Sale for Rf Coaxial Splitter - RF Fixed Attenuator & Load — Concept Microwave
Description Fixed Attenuators are electronic devices used to reduce the power level of a signal by a fixed amount with minimal distortion. They are designed to have a fixed and unchangeable attenuation. Fixed attenuators assist in preventing excess signals in devices or in reducing the effects of improper input/output terminations of oscillators, amplifiers etc., by controlling the power levels of the devices to a given value or range. Applications 1. Attenuators are used as volume control eq... -
Hot Selling for Sma Splitter Combiner - RF Fixed Attenuator & Load — Concept Microwave
Description Fixed Attenuators are electronic devices used to reduce the power level of a signal by a fixed amount with minimal distortion. They are designed to have a fixed and unchangeable attenuation. Fixed attenuators assist in preventing excess signals in devices or in reducing the effects of improper input/output terminations of oscillators, amplifiers etc., by controlling the power levels of the devices to a given value or range. Applications 1. Attenuators are used as volume control eq... -
PriceList for Coaxial Power Divider - Wilkinson 12 Way RF Power Divider & RF Power Splitter — Concept Microwave
Description 1. Concept’s 12 way power divider can split an input signal into 12 equal and identical signals. It can also be used as a power combiner, where the common port is the output and the 12 equal power ports are used as the inputs. 12 way Power dividers are widely used in wireless systems to divide power across equally across the system. 2. Concept’s 12 way power dividers are available in narrowband and broadband configurations, covering frequencies from DC-18GHz. They are designed to ... -
Good Wholesale Vendors Resistive Power Splitter - RF Fixed Attenuator & Load — Concept Microwave
Description Fixed Attenuators are electronic devices used to reduce the power level of a signal by a fixed amount with minimal distortion. They are designed to have a fixed and unchangeable attenuation. Fixed attenuators assist in preventing excess signals in devices or in reducing the effects of improper input/output terminations of oscillators, amplifiers etc., by controlling the power levels of the devices to a given value or range. Applications 1. Attenuators are used as volume control eq...