Products
-
2 Way SMA Power Divider&RF Power Splitter Series
• Offering high isolation, blocking signal cross-talk between output ports
• Wilkinson power dividers offer excellent amplitude and phase balance
• Multi-octave solutions from DC to 50GHz
-
4 Way SMA Power Divider & RF Power Splitter
Features:
1. Ultra Broadband
2. Excellent Phase and Amplitude Balance
3. Low VSWR and High Isolation
4. Wilkinson structure , Coaxial Connectors
5. Customized specifications and outlines
Concept’s Power Dividers/Splitters are designed to break an input signal into two or more output signals with a specific phase and amplitude. The insertion loss ranges from 0.1 dB to 6 dB with a frequency range of 0 Hz to 50GHz.
-
6 Way SMA Power Divider & RF Power Splitter
Features:
1. Ultra Broadband
2. Excellent Phase and Amplitude Balance
3. Low VSWR and High Isolation
4. Wilkinson structure , Coaxial Connectors
5. Custom and optimized designs are available
Concept’s Power Dividers and Splitters are designed for critical signal processing, ratio measurement, and power splitting applications that require minimal insertion loss and high isolation between ports.
-
8 Way SMA Power Dividers & RF Power Splitter
Features:
1. Low inertion Loss and High Isolation
2. Excellent Amplitude Balance and Phase Balance
3. Wilkinson power dividers offer high isolation, blocking signal cross-talk between output ports
RF Power divider and Power combiner is an equal power-distribution device and low insertion loss passive component. It can be applied to indoor or outdoor signal distribution system, featured as dividing one input signal into two or multiple signal outputs with the same amplitude
-
12 Way SMA Power Divider & RF Power Splitter
Features:
1. Excellent Amplitude and Phase Balance
2. Power: 10 Watts Input Maximum with Matched Terminations
3. Octave and Multi-Octave Frequency Coverage
4. Low VSWR, Small Size and Light Weight
5. High Isolation between Output Ports
Concept’s power dividers and combiners can be used in aerospace and defense, wireless and wireline communications applications and are available on a variety of connectors with 50 ohm impedance.
-
16 Way SMA Power Dividers & RF Power Splitter
Features:
1. Low inertion Loss
2. High Isolation
3. Excellent Amplitude Balance
4. Excellent Phase Balance
5. Frequency Covers from DC-18GHz
Concept’s power dividers and combiners are used in aerospace and defense, wireless, and wireline communications applications,which are available in a variety of connectorized with 50 ohm impedance
-
90 Degree Hybrid Coupler
Features
• High Directivity
• Low Insertion Loss
• Flat, broadband 90° phase shift
• Custom performance and package requirements available
Our Hybrid Coupler are available in narrow and broadband bandwidths making them ideal for applications including, power amplifier, mixers, power dividers / combiners, modulators, antenna feeds, attenuators, switches and phase shifters
-
180 Degree Hybrid Coupler
Features
• High Directivity
• Low Insertion Loss
• Excellent Phase and Amplitude Matching
• Can be customized to suit your specific performance or package requirements
Applications:
• Power amplifiers
• Broadcast
• Laboratory test
• Telecom and 5G Communication
-
SMA DC-18000MHz 4 Way Resistive Power Divider
CPD00000M18000A04A is a Resistive power divider with 4 way SMA connectors that operates from DC to 18GHz. Input SMA female and outputs SMA female. Total loss is the 12dB splitting loss plus insertion loss. Resistive power dividers have poor isolation between ports and therefore they are not recommended for combining signals. They offer wideband operation with flat and low loss and excellent amplitude and phase balance to 18GHz . The power splitter has a nominal power handling of 0.5W (CW) and a typical amplitude unbalance of ±0.2dB. The VSWR for all ports is 1.5 typical.
Our power divider can split an input signal into 4 equal and identical signals and allows operation at 0Hz, so they’re ideal for Broadband applications. The downside is there’s no isolation between ports, & resistive dividers are normally low power, in the range of 0.5-1watt. In order to operate at high frequencies the resistor chips are small, so they don’t handle applied voltage well.
-
RF Coaxial Isolator and Circulator
Features
1. High power handling up to 100W
2. Compact Construction – Lowest size
3. Drop-in, Coaxial, Waveguide structures
Concept offers a wide range of narrow and wide bandwidth RF and microwave isolator and circulator products in coaxial, drop-in and waveguide configurations, which are designed to operate in assigned bands from 85MHz to 40GHz.
-
IP67 Low PIM Cavity Combiner , 698-2690MHz/3300-4200MHz
The CUD00698M04200M4310FLP from Concept Microwave is a IP67 Cavity Combiner with passbands from 698-2690MHz and 3300-4200MHz with Low PIM ≤-155dBc@2*43dBm. It has an insertion loss of less than 0.3dB and an isolation of more than 50dB. It is available in a module that measures 161mm x 83.5mm x 30mm. This RF cavity combiner design is built with 4.3-10 connectors that are female gender. Other configuration, such as different passband and different connector are available under different model numbers.
-
Microwave and Millimete Waveguide Filters
Features
1. Bandwidths 0.1 to 10%
2. Extremely Low Insertion Loss
3. Custom Design for Customer Specific Requirements
4. Avaliable in Bandpass , Lowpass , Highpass , Band-stop and Diplexer
Waveguide filter is an electronic filter constructed with waveguide technology. Filters are devices used to allow signals at some frequencies to pass (the passband), while others are rejected (the stopband). Waveguide filters are most useful in the microwave band of frequencies, where they are a convenient size and have low loss. Examples of microwave filter use are found in satellite communications, telephone networks, and television broadcasting.